The waterproofing resistant to wash-out just right after 20 minutes
It can be used for outdoor applications, even in harsh environmental conditions such as low temperature (up to + 1 °C / + 33.8 °F) and high relative humidity (R.H. up to 98%). It allows waterproofing with small thicknesses throughout the whole year, and routine activities can be carried out inside the building during the remediation phase.
Unique waterproofing by intrinsic nature and application
The ready-to-use mono-component
One-component, water-based product formulated with elastomeric resins, which are able to exploit air for rapid drying (filming in just 20 minutes). These properties make the waterproofing a superior solution.
Filming time
20 min
Break Elongation
160%
Adhesion test on concrete
0,536 N/mm2
Weathering Test
1680 ore (10 anni)
Load resistance
1,4 MPa
Sustainability certifications
Recognizes that Acriflex Rapido has the ability to contribute to healthier indoor environment, reducing emissions of VOCs to zero.
Certifies that Acriflex Rapido contributes to healthier indoor areas, improving indoor air quality and enhancing energy savings.
Performance certifications
The double CE marking (1504-2 and 14891) identifies Acriflex Rapido as a product complying with European construction standards and the rules governing its distribution and use.
The “Asbestos Encapsulation Certified” certification guarantees the suitability of our product as an asbestos encapsulation solution.
| LEED v4 BD+C e ID+C | |
| SSc Heat Island Reduction – Option1 | – |
| MRc BPDO – EPD Option1 | ✓ |
| MRc BPDO Sourcing of Raw Materials – Option 2 |
– |
| MRc BPDO Material Ingredients – Option 2 |
✓ |
| EQc Low – Emitting materials | ✓ |
| LEED v4.1 BD+C e ID+C | |
| SSc Heat Island Reduction – Option 1 | – |
| MRc EPD – Option1 | ✓ |
| MRc Sourcing of Raw Materials | – |
| MRc Material Ingredients Option 2 | ✓ |
| EQc Low – Emitting materials | ✓ |
| WELL v2 | |
| X01.1 Material Restrictions Restrict Asbestos |
✓ |
| X02.1 Interior Hazardous Materials Management Manage Asbestos Hazards |
✓ |
| X01.3 Material Restrictions Restrict Lead |
n.a. |
| X05.2 Enhanced Material Restrictions Part 2 Select Compliant Architectural And Interior Product |
– |
| X06 VOC Restrictions | ✓ |
| X08.1 Materials Optimization – Select Materials With Enhanced Chemical Restrictions option 1 | ✓ |
| BREEAM International NC v6.0 | |
| Mat 01 – Life cycle impacts | EPD |
| Mat03 – Responsable sourcing of materials | ISO 14001 |
| Hea 02 – Indoor Air Quality | Indoor Air Comfort Gold |
| CAM Edilizia 06/08/2022 | |
| 2.5.1 Emissions in confined spaces (indoor pollution) | Indoor Air Comfort Gold |
| 2.5.6 Wooden products | n.a. |
| 2.5.7 Thermal and acoustic insulations | n.a. |
| 2.5.13 Paints and coatings | Upon request, we can provide test report |
Quick-drying waterproofing
Applicable all year round, even at low temperatures and high relative humidity level.
Water-based fast film-forming liquid waterproofing product, formulated with elastomeric resin. The product resists washout after 20 minutes of application, has excellent waterproofing properties, is elastic (elongation at break 160%) and resists aging (1680 hours of Weathering Test). It is suitable for waterproofing terraces, balconies, flat or sloping sheds, chimneys, eaves, flashings, cornices, foundation walls, vertical walls and cement products in general.