Ultrabit

Ultrabit

Waterproofing paste with high-speed drying and thick application.

Rendimiento

2.0 l/m²

Tiempo de secado

4h

Value referred to a temperature of 23°C/ 73.4°F and 50% of relative humidity.

Aplicación

Colores


Los colores mostrados son para propósitos ilustrativos.

Embalaje

25L plastic bucket.

One component, bituminous paste water-based waterproofing, enriched with polystyrene microspheres to realise a thickness up to 3 mm (0.12in) in only one coat. Ultrabit can be applied at low temperature and in case of high environmental relative humidity to waterproof and to level irregular supports such as foundations, roofs, terraces, balconies and flower boxes. . 

Ventajas

• Quick film formation after 30 minutes from the application.
• Cold application in one coat up to 3 mm (0.12in).
• Excellent filling ability of cracks and irregularities of the support.
• Applicable at low temperatures and in case of high environmental relative humidity.
• It does not need reinforcement mesh and it realises a continuous layer without joints.
• It can be applied on tiled surfaces in combination with Grip Primer (see technical data sheet).
• Easy and quick application.
• LEED product.
 

 

Características

Aspecto: En pasta

Componentes: De componente unico

Resistance to wash out (up to 5°C/41°F and 98% R.H.): 30 minutes.

Break elongation: 91.40%.

Tensile strength: 0.42 MPa= N/mm2.

Especificaciones del pliego de condiciones

Este contenido está visible sólamente para usuarios registrados

Ingresa