Acriflex Winter

Acriflex Winter

Two-component waterproofing liquid concrete membrane, formualted with water-based resins for balconies, terraces, swimming pools, tanks, cisterns, flat roofs, foundations, bituminous or slated membranes, parking areas, flashings, concrete structures and under tiles applications.


2.20 kg/m²

If applied without mesh the yield is 2.00 kg/m².

Drying time


Value referred to a temperature of 20°C/68°F and with 40% relative humidity level.



Colors shown are for illustrative purpose.


25 kg plastic bucket

Two-component liquid waterproofing membrane with high technology content. Highly elastic and long lasting, resistant to ponding water, UV rays, high and low temperatures, weathering agents and to freeze-thaw cycles.

It can be applied with low thicknesses without overloading the floor and it is suitable to waterproof in positive pressure of small and big surfaces, indoor and outdoor, both in vertical and horizontal.

Compared to traditional waterproofing liquid membranes, Acriflex Winter is characterized by a high resin content in comparison with the cement. It is thus possible to obtain a mixture that present a higher pot-life during summer and it increases the profitability of the work because it is faster and easier to apply. It can be applied by roll, brush, air less, or water squeegee. 

It reduces the probability of error by the applicator because it is applicable without joints and overlappings. It does not need a covering screed and it protects the underlying structure from water absorption and infiltrations. Its multipurpose allows applications over different kind of supports and for different scope.

Key benefits

  • Quick application: roll, brush or air-less
  • It allows to waterproof applying low thicknesses 
  • It can also be  applied onto existing floor
  • Effective on damaged surfaces too
  • Tiles can  directly be glued on the product, using a good adhesive for outside
  • It can be made walkable by using Floorgum Paint (see technical data sheet) or vehicles accesible by using Floorgum Tyre (see technical data sheet)
  • It can be coated using a finishing product line
  • It can also be applied  during winter season (up to +5°C)


Aspect: Liquid

Components: Two-component (A+B)

Elongation: 361%

Elongation after 100 days at 80°C: 361%

Impermeability: 9.4 atm

Crack Bridging Ability: 3.2 mm

Item Specifications

This content is visible only for registered users