Yield
– 1.00 kg/m² = 0.204 lb/ft²
Packaging
– 20 kg (44.09 lb) plastic bucket.
Drying time
– 12h
Value referred to +23°C/+73°F and 50% relative humidity
For vehicle access, wait 4 days.
Value referred to +23°C/+73°F and 50% relative humidity
For vehicle access, wait 4 days.
Application
– Brush
– Roll
– Trowel
– Airless
– Roll
– Trowel
– Airless
Characteristics
Low thickness multipurpose single-component driveway coating, suitable for indoor or outdoor environments. It can be used as a protective product in combination with liquid waterproofing products, thus creating a surface suitable for vehicles; the product is designed as an alternative to traditional asphalt surfaces or other drive-over coatings. The product is characterized by excellent resistance to wear, weathering agents, UV rays, water stagnation; moreover, it does have great resistance when placed in contact with substances such as oils, fuels and smog.
Appearance: Liquid
Components: One-component
Grain size: 0.06 – 0.1 mm // 0.002 – 0.04 in
Weathering test: 1000 hours without evident variations
Abrasion resistance (Taber dry test –1000 revolutions with CS-10 wheels): 0.1381% of eroded material
Abrasion resistance (Taber wet test –1000 revolutions with CS-10 wheels): 1.0750% of eroded material
Pull-off – adhesion on Acriflex Fybro: > 7 MPa
Adhesion by direct traction: 0.56 N/mm2 // 81.22 lb/in2 (psi)
Reaction to fire: class B – s2, d0
Highly resistant walkable coatings
easy and quick to apply
- Easy to use;
- High resistance to severe weather conditions, UV rays and brackish air;
- It can be driven on;
- Keeps its colour without yellowing;
- It can be applied to complete waterproofing systems based on synthetic resins