Two-component coloured epoxy paint to be used indoors for the creation of high-resistance drive-over coatings, also suitable for the transit of heavy vehicles such as forklifts.
It can be used as a finish for floors and walls as an alternative to tiles, for example in environments where floorings and walls without joints are require
Yield
– 0.30 kg/m² = 0.06 lb/ft²
Packaging
– 5.75 kg (12.67 lb) KIT.
Drying time
– 24h
Value referred to +23°C/+73°F and 50% relative humidity
Value referred to +23°C/+73°F and 50% relative humidity
Application
– Brush
– Roll
– Roll
Characteristics
Two-component coloured epoxy paint to be used indoors for the creation of high-resistance drive-over coatings, also suitable for the transit of heavy vehicles such as forklifts.
It can be used as a finish for vertical floors and walls as an alternative to tiles, for example in environments where floorings and walls without joints are required.
Aspect: liquid
Components: Two-component (part A + part B)
Resistance to non-stagnant salts, oils, diesel and petrol: excellent
Resistance to non-stagnant solvents: good
Resistance to strong acids (maximum concentration 10%): good
Resistance to 50 freeze-thaw cycles (-15°C/+15°C): unchanged
Two-component epoxy resin coatings
for the creation of uniform and low thickness finishes
- Resistant to non-stagnant salts, oil, diesel and petrol.
- Highly hygienic surface.
- It can be driven on with vehicles
- Water washable and easy to clean.
- It creates a continuous and seamless coating.
- Easy and quick to apply.