Walkable waterproofing for surfaces not wider than 20 sqm. It does not need armor.
This system provides for the waterproofing of surfaces subjected to vehicles transit,horizontal or inclined already paved, not wider than 20 sqm, using WATstop, an adhesive coadjuvant to apply directly on the support in order to make a valuable bridge to cling Acriflex Fybro, a bi-component fiber-reinforced elastic liquid membrane, used in combination with Safety Joint Roll, an elastic band for the treatment of critical points such as horizontal vertical joints.
As finishing of the waterproofing layer thus obtained it is possible to apply the driveover coating Floorgum Tyre Mono, able to resist the mechanical stresses due to the transit of wheeled vehicles and to protect the waterproofing layer underneath, allowing to create a surface suitable for the transit of vehicles applying lower thickness and in less time than traditional systems.
Once applied, the system becomes a driveover waterproofing coating characterized by a high elasticity and excellent resistance to wear, UV rays and water stagnation. The system is suitable both indoor and outdoor.
This content is visible only for registered users
Three component epoxy resin to waterproof both with negative and positive pressure, to be used as osmotic over undergorund walls, to encapsulate rising damp and to realize vapor barrier over wet support.
Non woven elastic band for the protection of most critical areas.
Fiber reinforced waterproofing liquid membrane based on cement to waterproof balconies, terraces, swimming pools or foundations. Thank to the presence of polypropilene fibers, ii can be applied without reinforcement mesh.
Mono component multipurpose synthetic coating suitable for vehicles.