Subscribe

Recover password

Acriflex Fybro

Fiber reinforced waterproofing liquid membrane based on cement to waterproof balconies, terraces, swimming pools or foundations. Thank to the presence of polypropilene fibers, ii can be applied without reinforcement mesh.

Yield: 2.50 kg/m²
Drying time: 4h

Value referred to a temperature of 20 °C and with relative humidity level of 40%.

Application:
Colors:


Colors shown are for illustrative purpose.

Packaging:

25 kg plastic bucket

Two component fiber reinforced liquid waterproofing product, cement based, to use to waterproof with positive pressure without using traditional reinforcement mesh.

It can be applied on roofs, balconies and terraces, swimming pools, tanks, even if with irregular shapes. It can be applied by roll, brush, air less, or water squeegee and it presents high resistance to UV rays, freeze-thaw cycles, ponding water and weathering.

It waterproof with low thickness, it doesn not overload the loft and it can be used over different kind of support and with different scope. It reduces the probability of error by the applicator because it is applicable without joints and overlappings.

It is not dangerous for the applicator because it is a water based product, solvent free. Generally used for surfaces not wider than 20 m²

Item Specifications

This content is visible only for registered users

» Login
  • Quick application: roll, brush or air-less
  • No armor needed
  • Once dry (from 30 to 180 minutes) it becomes rain-resistant
  • High traction resistance
  • Excellent elasticity
  • It can be also applied onto existing floor
  • Effective also on some kind of damaged surfaces
  • Tiles can be pasted directly on the product, using a good adhesive for outside
  • It can be made walkable using Floorgum Paint (see technical data sheet) or vehicular using Floorgum Tyre (see technical data sheet)
  • It can be coated using a finishing product line
  • It can be applied also on winter (up to +5°C)

Aspect: Liquid

Components: Two-component (A+B)

Elongation: 150%

Waterproofing: 9,5 ATM

Crack Bridging Ability: 3,2 mm

Related systems

Double click on the video to enter fullscreen mode.

References

1 2 3 4 5 6 7 8

Events & News

» Archive

Press area

» Archive

Diasen® s.r.l. - Zona Industriale Berbentina, 5 - 60041 Sassoferrato (AN) - ITALY
Tel. +39 0732.9718 - Fax +39 0732.971899 - Email: diasen@diasen.com
P.I. and Reg. Imp. AN 01553210426

This content is visible only for registered users

» Login or Subscribe