Diasen offers breathable products for the insulation of walls, interior or exterior, characterized by high efficiency, high permeability, high performance and by the best thermal conductivity value.
The products can be used for heat insulation and cooling insulation, providing an excellent thermo-hygrometry, a long-lasting insulation and allowing the achievement of a high comfort and welfare housing in full compliance with technical standards.
The versatility of Diasen insulating products allows them to be used for new construction, for old construction, for renovation and energy requalification, for facades and partition walls.
Diasen for over 25 years has specialized in the production of premixed plasters for thermal insulation and acoustic insulation, dehumidification and restoration.
By constant research and the experience was born Diathonite, a natural premixed compound, cork-based, with the best technical parameters available on the market.
The plasters of Diathonite’s family can be used for thermal insulation, acoustic insulation, dehumidification and restoration of vertical walls, both indoors and outdoors.
Cork-based and spray-applied thermal insulation plaster, suitable for façades and indoor applications: composed by natural raw materials, such as cork, natural hydraulic lime, perlite, the material is perfect for new and historic buildings, retrofitting insulation, ceilings and green building.
Ecological plaster for thermal insulation, acoustic comfort and dehumidification, suitable for new and historic buildings: it is composed by natural raw materials, such as cork, natural hydraulic lime 3.5, clay, and it is perfect for façades, retrofitting insulation, ceilings and green building in general.
Diathonite Acoustix +
Acoustic spray-applied plaster for sound absorption and insulation, made of natural raw materials such as cork, natural hydraulic lime, clay and fibers, suitable for applications onto walls, ceilings, rounded surfaces: it absorbs more than 80% of sound waves.
Sound insulation and acoustic absorption premixed plaster, made of natural raw materials such as cork, natural hydraulic lime, clay and fibers, suitable for indoor and outdoor applications, for walls, ceilings, vaults, rounded surfaces and façades.
Dehumidifying and anti-saltpetre plaster with good thermal insulation properties, made of pure cork granules and natural hydraulic lime NHL 5, to improve the indoor air quality and to give new life to masonries and walls affected by rising dampness problems.
M10 and CRM structural thermal insulation plaster to reinforce historic buildings and to improve the thermal comfort at the same time. Composed by natural raw materials, such as cork, natural hydraulic lime NHL 5, clay, it is perfect for façades, retrofitting insulation, ceilings, vaults.
Lightweight premixed thermal screed to be used with low thicknesses both in new constructions and renovations of historic buildings, as it does not add too much weight to the structure; 100% ecological material, made of cork, clay and diatomaceous earth.
Lightweight bio-mortar based on cork, clay, diatomaceous earth and natural hydraulic binder, designed for the creation of ready-to-use thermal screeds, ideal for the insulation of ceilings, floors and ventilated roofs, both internal and external, in the case of renovations or new buildings.